Search all sites near me now
Search your favourite swimming spots

Tasman region

Surface Water Zone: Waimea Surface Water Zone

The Waimea Water Management area includes the Wairoa, Waimea and Wai-iti rivers. The Waimea plains are underlain by two confined and two unconfined aquifers which are linked directly to river recharge. Groundwater is the main water source for the intensive horticulture of the area as well as industrial and municipal supply.

Historically there has been significant over allocation of water which causes difficulties in maintaining ecological flows in the lower river.  Due to the pressure on the groundwater supply, there is high risk of sea water intrusion along the coastal margin. To meet sustainable flow requirements in the Waimea River significant water restrictions are required which can include cessation of water takes. Abstraction restrictions apply regularly during the irrigation season.

The Waimea Community Dam is currently in the commissioning phase.  Once operative (by the start of the 2024/25 irrigation season), it will provide water augmentation to address these allocation pressures and future proof water supply.

Resource Consent information for this zone is current to the 2023/24 season.

Water Use
Surface Water in this Zone

Regional councils collect information about how much water is available and manage resource consents for those wishing to take water from rivers and streams. Use the buttons below to view information on: how much water is available, where it comes from and how its used.

{{illustrationHeading}}

Rainfall {{waterAvailable.rainfall}} Runoff to sea {{waterAvailable.runoff}} Surface Water available: {{waterSource.availableToAllocate}} Irrigation
{{waterUsage.irrigationLabel}}
Industrial
{{waterUsage.industrialLabel}}
Stock
{{waterUsage.stockLabel}}
Hydroelectrical
{{waterUsage.hydroLabel}}
Town supply
{{waterUsage.drinkingLabel}}
  • How much surface water is there in this zone?

    Rainfall and flow in this surface water zone

    Show Hide

    Rainfall and runoff

    Relative breakdown Source Volume
    Rainfall total:
    {{waterAvailable.rainfall }}
    rainfall Rainfall Total {{waterAvailable.rainfall}}
    Runoff total:
    {{waterAvailable.runoff }}
    runoff Runoff to sea {{waterAvailable.runoff}}

    The table above shows the average amount of rainfall the water management zone receives each year and how much of that flows out to sea. These are approximate figures only.

    Allocation target. Currently overallocated.

  • Water consents: How much water is consented and used?

    Surface water available to consent

    Show Hide

    Consented water in this surface water zone

    Use the tables below to look at how much water is available compared with how much is actually consented within this water management zone. Click the plus to expand subzones where available

    {{item.zoneId}}
    Comparing consents and use
    Amount available to consent In this surface water management zone:
    {{item.data.totalAvailableAmount}} {{item.data.totalAvailableUnits}}
    available to consent
    Amount consented
    measured and non measured
    Amount used (measured)
    Amount Units Consented or used as a percentage of available
    Total available to consent {{item.data.totalAvailableAmount}} {{item.data.totalAvailableAmount}} {{item.data.totalAvailableUnits}}
    Total consented {{item.data.totalConsented.amount}} {{item.data.totalConsented.amount}} {{item.data.totalAvailableUnits}} {{item.data.totalConsented.percentText}}
    Total consented and measured {{item.data.totalMeasured.amount}} {{item.data.totalMeasured.amount}} {{item.data.totalAvailableUnits}} {{item.data.totalMeasured.percentText}}
    Total measured amount used {{item.data.totalAmountUsed.amount}} {{item.data.totalAvailableUnits}} {{item.data.totalAmountUsed.percentText}}
    Total measured volume used {{item.data.totalAnnualVolumeUsed}} {{item.data.totalAnnualVolumeUnits}}

    The table above shows the amount of water that is available for use compared to the amount that has been consented. The ‘Total Consented’ and ‘Total Consented and Measured’ fields are based on percentages of the ‘Total available to Consent’ field. If this field is not populated no data will be displayed. Some consents require actual use to be monitored and this is presented as 'Total measured volume Used' where available.

  • Water consents: How is consented water used?

    Consents by use in this surface water zone

    Show Hide

    Consented water

    Overall annual volume for {{waterAvailable.year}}
    Relative breakdown
    Activity Percentage of total consented Total volume Number of consents
    {{item.displayText}} {{item.displayText}} - - No data available {{item.breakdownPercentage}}% {{item.totalVolume}} m3 {{item.numberOfConsents}}
    Total {{waterUsage.total.percentageConsented}}% {{waterUsage.total.totalVolume}} m3 {{waterUsage.total.numberOfConsents}}

    The above table shows the proportion of water consented for irrigation, industrial, stock, town supply and other. It excludes hydro electricity. In this region/management zone {{hydroUsage.totalVolume}} m3/year is consented for hydro-electricity and makes up {{hydroUsage.percentageConsented}}% of the total water volume consented for this region/management zone

Sites

Monitored sites in this Zone

...retrieving sites.

No sites found.